C.U.P.

Disscussing old, rare, very specific or otherwise uncommon units and measurements
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

C.U.P.

Postby guest » Sun Sep 09, 2007 11:24 pm

This unit is used in reloading ammunition for hobby shooters it is called cup and stands for Copper Units of Pressure. a small cylinder of copper is placed between a piston and an anvil. when a test shot is fired from a control chamber with the piston in direct contact with the test shot system pressure it crushes this copper cylinder. that is then measured, length wise, and a chart tells the cup used to determin the safety or useabillity of that load. new systems use piezoeletric pressure transducers to convert to good old fashon PSI. is there a conversion for CUP to PSI? because psi is used to tell steel strength and other points of stress or componant failure it means more to me than the older system. on the other hand cup is used in many reloading manuals for powders that are still in use today but go back almoast 100 years. just curious thanks for any help. steve
guest
 

Postby Dirtman » Tue Sep 11, 2007 11:14 am

Steve, you can get a description here: http://en.wikipedia.org/wiki/Copper_units_of_pressure but I would think tech support at: http://www.sierrabullets.com/ and http://www.hornady.com/ would yield better results IMHO

George
Dirtman
Expert
 
Posts: 574
Joined: Sat Jan 21, 2006 2:04 pm
Location: California

Re: C.U.P.

Postby guest » Sat Oct 26, 2013 2:11 pm

US Conversion (ANSI): PSI = -17,902 + 1.516 x CUP
European Conv (CIP): PSI = -2806.88 + 1.20911 x CUP
guest
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to Exotic units



    Our Privacy Policy       Cooking Measures Converter       Metric conversions