ton to cubic yard

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

ton to cubic yard

Postby cia » Sat Dec 02, 2006 3:59 am

how many cubic yards would result from 20 tons of gravel
cia
 

Postby Dip Stick » Fri Dec 15, 2006 5:08 am

For example: A standard tandem axel dump truck can carry approximately 16 cubic yards or approximately 22 tons tons of stone or gravel. Therefore, you can safely assume 16 +/- cubic yards.

From Clayton Masonry Centers (further info)
One Ton of stone/gravel will cover:
220 SqFt at 1 inch deep
115 SqFt at 2 inch deep
75 SqFt at 3 inch deep
60 SqFt at 4 inch deep

Hope the info helps - Dip
Dip Stick
 

Postby Krista » Thu Jan 04, 2007 11:52 pm

So then if I have 180yards of stone, how many tons do I have?
Krista
 

Postby Dirtman » Fri Jan 05, 2007 12:32 pm

Krista:

Sized from 1/4" to 2", an approximate weight per loose cubic yard of gravel (as loaded in a dump truck) is 3400 pounds wet, 2850 pounds dry, anywhere in between and can be somewhat outside those weight boundaries.

That's a long answer for an approximation but weight to volume factors differ because of different rock densities, moisture content, velocities, etc.. An individual gravel pit will have a more accurate volume to weight factor for the product they produce but even that will change slightly from run to run.

Why add water? Dust control is the main reason. Few pits have "dry" gravel. Even expensive, oven treated material has some moisture content. The higher the moisture content, the higher the weight.

If you use a weight of 3125 pounds per loose cubic yard of gravel, you'll be close. That gives you a cubic yard to ton weight factor of 1.5625.

1.5625 tons/yd^3 * 180 loose cubic yards of gravel will weigh approximately 281 tons, plus or minus.

George
Last edited by Dirtman on Thu May 07, 2009 6:04 am, edited 1 time in total.
Dirtman
Expert
 
Posts: 574
Joined: Sat Jan 21, 2006 2:04 pm
Location: California

block and gravel

Postby Guest » Wed May 06, 2009 10:22 pm

how many tons of gravel for a 16ftx4ftx2ft area
Guest
 

Re: block and gravel

Postby Dirtman » Thu May 07, 2009 6:00 am

Anonymous wrote:how many tons of gravel for a 16ftx4ftx2ft area


16*4*2 = 128 ft^3,
128 ft^3 / 27 ft^3 = 4.74 yd^3
4.74 yd^3 * 1.5625 tons/yd^3 = 7.4 tons approximately.
Dirtman
Expert
 
Posts: 574
Joined: Sat Jan 21, 2006 2:04 pm
Location: California


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?



    Our Privacy Policy       Cooking Measures Converter       Metric conversions