conversion :-nm3 to m3

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

conversion :-nm3 to m3

Postby vishal dixit » Wed Apr 21, 2004 12:54 pm

how to convert :-normal metre cube to meter cube.
vishal dixit
 

Re: conversion :-nm3 to m3

Postby Guest » Thu Apr 22, 2004 11:06 pm

vishal dixit wrote:how to convert :-normal metre cube to meter cube.

metre and meter are the same thing.
Guest
 

Postby Guest » Thu Jul 14, 2005 3:25 pm

[quote="Anonymous"]Representing "normal meter cubed" as Nm³ or nm³ is a bad practice, contrary to SI conventions because "n" is reserved as a prefix for nano-, and "N" is reserved for newton. This is guarenteed to cause confusion for some people who read it. Since "normal" is not usually used in the US, I don't know what the preferred notation is.

Not too sure that it is bad practice to use N for 'normal'. There are precendents for multiple use of the same letters, e.g. m for milli and metre. The key thing is to ensure that units are separated with spaces or full stops (e.g. N m or N.m for Newton metres) whereas prefixes are adjacent (e.g. Nm3 for normal metres cubed).

However, use of 'Normal' has always created confusion regarding what temperature is applied, e.g. 0 C, 15 C, 20 C, 60 F. I used to think it was 20 C but have now been converted to the 0 C definition (although this is anything but 'normal' where I live!). Perhaps the important thing is to ensure that the document/spec/data sheet that refers to Nm3 has a clear definition in terms of temperature. Don't thing there is any confusion on the pressure of 1.013 bar a though?
Guest
 

Nm3 to m3

Postby Sagar » Mon Aug 29, 2005 12:32 pm

I dont think that Nm3 is a bad pratice as most of the design value of a gas flow mentioned by suppliers outside india is that.. only thing is we need to convert them to m3/h during calcutions - which is same as mentioned b4 - nm3 is volume at 1atm or 10330 mmWc and 273 K , and hence actual volume at given conditions can be evaluated by ideal gas law..
Sagar
 

Postby Guest » Mon Aug 29, 2005 6:19 pm

The SI Brochure (or NIST SP 330, if you're American) specifically deprecate attaching "qualifers" of any kind directly to the unit.
Guest
 

Re: conversion :-nm3/hr to kg/hr

Postby krishna » Tue Oct 23, 2007 11:07 am

Conversion of Flue gas of 24000 Nm3/Hr to kg/Hr
krishna
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?

    Our Privacy Policy       Cooking Measures Converter       Metric conversions