Architect's Scale

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

Architect's Scale

Postby Whomever » Sun Jul 17, 2011 10:08 pm

I am reading an architect's blueprint for the construction of a structure. The scale is 1=50. What does this mean? 1cm=50mm? Is this equivalent to 1/2" = 1'-0" on a customary scale?
Whomever
 

Re: Architect's Scale

Postby spider » Mon Jul 18, 2011 10:41 pm

1 to 50 means that the scale is fifty (50) times smaller than the actual or physical measurements regardless of the measurement unit.

Often, the blueprints explicitly identify the measurement units, e.g.: SCALE 1/8" = 1'-0", which means that one eighth (1/8 or 0.125) of each inch on the blueprint corresponds to one (1) foot of an actual object the blueprint represents.

Take another look at the your architect's blueprint to make sure that the scale reads 1=50 without any measurement unit.

If indeed, there are no measurement units listed on both sides of the 1=50 equation, then:

1cm=50cm
1/2"=50/2"=25"=2'1"
Unit measurement online conversions, calculations and formulas
http://www.aqua-calc.com/
spider
competent
 
Posts: 74
Joined: Thu Jun 09, 2005 9:57 am
Location: United States

Re: Architect's Scale

Postby northstar » Thu Aug 04, 2011 9:10 pm


>

The 1 to 50 is from an Engineers scale, and not the architectural scale.
EX: 1 to 50 means 1 inch ( on the plans ) equals 50 feet, ...or 1 to
20 means 1 inch equals 20 feet. The engineers use these ratios because
of larger distances involved.

<
northstar
 

Re: Architect's Scale

Postby PerezTurner » Fri Jul 12, 2013 9:39 am

I never ever use to Architect's Scale, Can somebody explain it more. I need detailed description with its features.
PerezTurner
 
Posts: 2
Joined: Fri Jul 12, 2013 9:21 am


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?

    cron

    Our Privacy Policy       Cooking Measures Converter       Metric conversions