mg/kg to ppm

by **niroj** » Mon Jul 31, 2006 8:59 pm

How to convert mmol/L into mg%?

by **Guest** » Tue Aug 08, 2006 1:55 am

Just divide mg/kg by 10000 to get %

by **Guest** » Thu Aug 24, 2006 1:06 am

how do I conver mg/kg into ME/L (milliequilavent in liters)

by **shafeeulla** » Mon Sep 18, 2006 6:20 pm

Jodine wrote:
Anonymous wrote:
Anonymous wrote:[How can i convert mg/kg to %

2/10000=.0002

convert ppm in to g/tonne

by **nick** » Thu Nov 16, 2006 3:23 pm

how can I convert mg/m3 into ppm's?[/quote]

by **Guest** » Tue Jan 30, 2007 12:53 am

nick wrote:how can I convert mg/m3 into ppm's?

[/quote]

Nick

I don't know if you got an answer to your request or not but the answer is:

simply multiply mg/m3 x MW/24.04 (the volume occupied by one mole at 20C)

For example to convert 10 mg/m3 of HCN to ppm:
MW of HCN = 27 g/mol divided by 24.04 = 1.123 x 10 mg/m3 = 11.23 ppm

by **krishnaveni** » Wed Mar 14, 2007 11:27 pm

Anonymous wrote:how can I convert mg/kg into ppm's?

26430mg/lit convert into ppm how can I convert this

by **Guest** » Mon May 07, 2007 6:43 pm

how do i convert mg/L to mg/cm2
im soo fuzzled!

by **new girl** » Tue Sep 11, 2007 5:08 am

how can i convert 45 654 mg to kg

by **JimmyFW1** » Wed Sep 19, 2007 3:05 am

Anonymous wrote:how do i convert mg/L to mg/cm2
im soo fuzzled!

Same question, opposite direction...

hit me back @ JimmyW@geai.com

by **fahamu** » Mon Sep 24, 2007 4:39 pm

Anonymous wrote:how can I convert mg/kg into ppm's?

0.15gm/bhp-hr to ppm

by **Pieter van Eeden** » Sun Sep 30, 2007 12:58 pm

Do I understand the conversions for the above right?

from % (m/m) to mg/kg multiply with 10 000
from mg/kg to % divide by 10 000

by **Fik@Chem!** » Wed Nov 07, 2007 1:15 am

Can anyone help? I need to convert concentrations into ppm.

For example 0.1mg/l K+

Help is much appreciated!!

by **ulfa_cutebanget** » Thu Nov 15, 2007 5:36 am

Please help, I need to convert ppm to mg/kg
I have the consentrate 250 ppm Nitrogen/kg oily sludge
the question how much I have to add the fertilizer if i have 1,2 kg oily sludge?
thanks for help, it much appreciated.. :D

by **ulfa_cutebanget** » Thu Nov 15, 2007 5:55 am

help again,
For Example Total Petroleum Hydrocarbons (TPH) 10000ppm equal 1%, how come?
please help..
you can hit me back at ulfa_cutebanget@yahoo.com
best regards,
ulfa :)

by **badscientist** » Wed Nov 28, 2007 8:59 am

how do I convert 4ppm O2 into mol/L

by **Guest** » Wed Dec 26, 2007 8:55 pm

dabumb wrote:how do you convert grams to ppm?

0.2gms equal to how much ppm

by **Guest** » Wed Jan 02, 2008 6:46 pm

[quote="Anonymous"]how can I convert mg/kg into mole

by **mitch** » Sun Mar 09, 2008 12:56 pm

:( how to convert mg/kg to ml/kg

please help me..thanks

by MR » Fri Apr 11, 2008 11:44 pm

Anonymous wrote:
PhysicsConfusesMe wrote:how would I convert mg into kg?

For example I have a problem that is convert 5211 mg into kg. I am so confused!
sorry to ask the same question but i need to covert 10 mg to kg

Divide by 1,000,000 (1 million)

1 Kg=1000g
1g=1000mg
therefore 1000 X 1000= 1,000,000
so 10 mg= .00001 Kg

by **Guest** » Thu May 01, 2008 2:58 pm

how do I convert 4ppm into mmol/L

by **Guest** » Thu May 01, 2008 3:01 pm

How do I convert 4ppm O2 into mol/L.

Please send the answer to my e-mail:

alirefai2001@yahoo.com

Thanks

by **Guest** » Wed Jun 04, 2008 6:24 pm

I understand the concept 1 mg/L= 1ppm. How i convert 31.7mg/ml to ppm???

by **Guest** » Thu Jun 12, 2008 11:23 pm

I just found out that I shipped off 462,360 lbs of Nickel wastewater last year...my analytical shows 2690 mg/kg of nickel in the waste...how many pounds of nickel would I have sent out in the 462,360 lbs of wastewater...i'm stumped. How would this be calculated.

by **Guest** » Fri Jun 13, 2008 1:47 am

Anonymous wrote:I just found out that I shipped off 462,360 lbs of Nickel wastewater last year...my analytical shows 2690 mg/kg of nickel in the waste...how many pounds of nickel would I have sent out in the 462,360 lbs of wastewater...i'm stumped. How would this be calculated.

462360 lb x 0.4536 kg/lb = 209726.5 kg of waste water
209726.5 kg x 2690mg/kg = 564 kg of nickel

564 kg x 1lb/0.4536 kg = 1244 lb of nickel
(obviously, if you measured in metric, two conversions would be saved)

by **kamanjah** » Wed Sep 24, 2008 2:30 am

I have some dog treats that say they have 350ppm of glucosamine. The bag is 8 oz, unknown number of treats inside. Is there any way to figure out how many mg is in each treat? Thanks!

by **Guest** » Fri Oct 24, 2008 2:06 pm

how can I convert gm/liter into ppm's,

i.e. 1gm/lit = how much ppm ????

Pl send on prashant.maurya@alembic.co.in

by **bina** » Wed Nov 12, 2008 3:27 pm

I have result of 0.443mg/l of Cr6+ from 4g of screw testing using UV analysis. How to convert mg/l to ppm?

by **Guest** » Fri Nov 28, 2008 9:08 am

[quote="Anonymous"]how can I convert 1 ppm Mg into 1 Kg/ha of Mg

by **Guest** » Sun Dec 14, 2008 8:30 pm

Anonymous wrote:
Adam wrote:you've got the answer already...mg/kg is ppm.

so 10 mg/ kg is 50 ppm. Same goes for mg/L.

10 mg/L is 10 ppm.

hope this helps.
Adam

SORRY!!!!! 10 mg/kg is 10 ppm NOT 50,

Adam

10 mg/100kg=how much ppm?

by **Professor** » Tue Mar 31, 2009 1:48 pm

If you are seriously putting your homework here and asking basic unit conversion questions then the best thing to do is go to a website, type in your starting number, change the units to what you want, and get your answer.

There are heaps of free websites that will convert units for you.

If you really want to learn how to do it, don't ask for the answer here. I have read all the replies on here and I can tell you most of them are WRONG.

I suggest learning how to multiple or divide by 1000, and then learning what all the prefixes mean.

Here are the basic ones
Kilo (k)= 1000 (a thousand)
milli (m) = 1/1000 or 0.001 (a thousandth)
micro (u) = 1/1000000 (a millionth)

TO go up you need to divide by 1000 for each step. To go down you need to multiple by 1000.

Percentage (%) is the same as parts per hundred.

To change from ppm to % you need to divide by 10000 (ten thousand)
i.e. 10000ppm is the same as 1%

The tricky part is that a kilogram (kg) of (pure) water is the same as a liter (L) in terms of parts per million (weight/volume). Get over that tricky part and you can do the rest.

Or just use an online unit converter and don't worry about it.

If this is for your science test, then give up, science is not for you.

by **kevppp** » Wed May 13, 2009 3:11 pm

620mg/kg convert to micro/dl

by **sonal** » Sat Jul 04, 2009 9:13 pm

[quote="Anonymous"]how can I convert gm/liter into ppm's,

i.e. 1gm/lit = how much ppm ????

Pl send on sonalbatradr@gmail.com

by **dennis** » Sun Aug 02, 2009 2:00 am

HOW MANY MEGABYTES MAKE A GIGABYTE OR KILOBYTES?

by **wisal** » Sat Sep 05, 2009 7:12 pm

Guest wrote:how do I convert 4ppm into mmol/L

How to converst CO2 PPM to mg/m2

by **Chemhelp11** » Tue Mar 02, 2010 12:52 am

I have a Chem problem that says "fish need at least 4.00ppm dissolved 02 for survival.
what is the concentration in mol/L?

by **Dordhs** » Wed Mar 31, 2010 12:09 am

hey guys I was wondering if I could get some help/info. first let me say I had all this info before stored on a laptop I had stolen about a year ago and wasnt needed again until recently.

Anyways, does anyone have a rough average in PPM parts per million of the standard USA Lrg. GM catalytic converter, or what about USA foreign/imports converter contents?

thanks

by **azafar** » Wed Apr 07, 2010 5:06 pm

Is ug/mg = mg/kg = ppm?

by **hercybaby** » Tue Apr 13, 2010 5:14 am

Guest wrote:thanks

How do you convert inches into a linear foot ? What is a linear foot?? Please email me with answer asap. Thanks Linda
Hercybaby@yahoo.com

by **Dirtman** » Wed Apr 14, 2010 2:00 am

hercybaby wrote:
Guest wrote:thanks

How do you convert inches into a linear foot ? What is a linear foot?? Please email me with answer asap. Thanks Linda
Hercybaby@yahoo.com

Linear, in this context, simply means a line. It has no width and no depth, it only denotes length.

A linear foot is a line 1 foot long, so 12 in = 1 ft.

by **lau** » Fri May 07, 2010 7:14 am

I need to convert mg/kg to mg/g for comparing concentration of trace metals in sediment. Can anyone help me?

by **Laura** » Thu May 13, 2010 7:17 am

how do I convert mg/g to mg/kg?

by **Guest** » Sat May 15, 2010 7:42 pm

Could you please convert 15 mg/kg to % m/m

by **jhosmel3** » Wed May 19, 2010 9:29 am

For example I have a problem that is convert 5211 mg into kg. I am so confused!

by **Dirtman** » Wed May 19, 2010 6:15 pm

jhosmel3 wrote:For example I have a problem that is convert 5211 mg into kg. I am so confused!

There are 1 000 000 mg in 1 kg, so: 5211 mg / 1 000 000 = ?

by **guest** » Fri Jul 23, 2010 5:46 am

Can you convert Ohms into ppm???

by **Guest** » Sun Sep 05, 2010 8:06 pm

I need to know how to apply 1 part calcium hypochlorite to 100 parts water for water treatment in a 1 liter/quart bottle. I want to make a concentrate of calcium hypochlorite in a small bottle to treat wild water, so I need to know how many drops to put into a quart/liter. I also need to know the amount of the concentrate to mix. Thanks for any help you can give me.

by **maaike22** » Fri Oct 01, 2010 9:52 am

vancomycin 15 mg per kg. every 12 hours IV
label: vancomycin for injection 1 GM. vial
pt. weight: 147 lbs.
how much to give every 12?

by **msusant** » Tue Oct 05, 2010 6:04 am

dabumb wrote:how do you convert grams to ppm?

12 mg of zinc into ppm

by **alisha** » Tue Oct 26, 2010 6:43 am

PhysicsConfusesMe wrote:how would I convert mg into kg?

For example I have a problem that is convert 5211 mg into kg. I am so confused!

here is the answer for this question
1kg=1000gm and
1gm=1000mg
so,
1kg=1000,000mg
and 1mg=1/1000,000kg
so 5211mg=5211/1000,000kg
0.005211kg

by **alisha** » Tue Oct 26, 2010 6:50 am

PhysicsConfusesMe wrote:how would I convert mg into kg?

For example I have a problem that is convert 5211 mg into kg. I am so confused!

her is the answer for this question
1kg=1000gm
and 1gm= 1000mg
so, 1kg=1000,000mg
hence, 1mg=1/1000,000kg
so, 5211mg=5211/1000,000kg
=0.005211kg

by **shahbaz** » Tue Oct 26, 2010 2:20 pm

67.15mg/kg into ppm

by **trish** » Thu Nov 11, 2010 9:03 pm

how to convert mg/g to ppm?

by **jhouser** » Fri Dec 03, 2010 11:49 pm

I have some wipe samples and the lab reported ug/kg can I somehow convert this to ug/100cm2?

More info