degrees to [percent

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

degrees to [percent

Postby drudnick » Mon Aug 02, 2004 9:44 pm

Hi, I have slope measurements in degrees, and I want to know how to convert them to percent (gradient) and vice versa. Ah, age and the loss of trigonometric skills! I appreciate the assistance.

Sincerely,

DR
drudnick
 
Posts: 1
Joined: Mon Aug 02, 2004 9:41 pm

Re: degrees to [percent

Postby Knight » Mon Aug 02, 2004 11:59 pm

drudnick wrote:Hi, I have slope measurements in degrees, and I want to know how to convert them to percent (gradient) and vice versa. Ah, age and the loss of trigonometric skills! I appreciate the assistance.

First, lets look at how we determine what the the slope of a line in geometry, or of a slanted surface such as a road or a roof in practical geometry, is the ratio of the "rise" to the "run." This might be presented as a fraction or a decimal:

Code: Select all
         +              +                      +
        / |             /|                   /  |
      /   |6           / |6               /     |3
    /     |           /  |             /        |
  +-------+          +---+          +-----------+
      6                3                  9

  slope=6/6=1     slope=6/3=2       slope=3/9=1/3


A slope can also be presented as a percentage, which is really just a special fraction whose denominator is 100, as indicated by the "%" symbol. The three slopes above are then 100%, 200%, and 33 1/3 % respectively (obtained by multiplying each slope by 100%).

We can also talk about the ANGLE of a slope, which is the angle of the slanted line above the horizontal. This is related to the slope itself by trigonometry: the slope is the tangent of the angle.

Code: Select all
          +              +                      +
        / |             /|                   /  |
      /   |6           / |6               /     |3
    /45   |           /63|             /18      |
  +-------+          +---+          +-----------+
      6                3                  9

  angle=45 deg    angle=63.4 deg      angle=18.4 deg


So, the trigonometry magic that you are looking for is the tangent. If you know the angle, take the tangent it, and you will get the slope of the angle. If you multiply the slope by 100, you'll have the percentage of slope.
Knight
Expert
 
Posts: 309
Joined: Tue Jan 13, 2004 9:43 pm
Location: Los Alamos, NM


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?



    Our Privacy Policy       Cooking Measures Converter       Metric conversions

    cron