bar > ?

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

bar > ?

Postby Omar » Tue Jan 30, 2007 9:06 am

I was reading an article on a certain knife, and they performed several tests concerning the strength of the knife, and one of them was how much pressure or weight the locking mechanism could take before the it closed without fingering the proper release.

The rating for this was "80 bar"

Now i've been doing some research and i found out that the bar is the unit of measure for barometers. What i'd like to know is how i would convert that figure into something that makes more sense to me like pounds or kg per inch/cm, or if it would even be possible to convert it to regular Kg or lbs without the area. Thanks in advance for any help.
Omar
 

Re: bar > ?

Postby convert-me.com » Tue Jan 30, 2007 3:55 pm

Omar wrote:I was reading an article on a certain knife, and they performed several tests concerning the strength of the knife, and one of them was how much pressure or weight the locking mechanism could take before the it closed without fingering the proper release.

The rating for this was "80 bar"

Now i've been doing some research and i found out that the bar is the unit of measure for barometers. What i'd like to know is how i would convert that figure into something that makes more sense to me like pounds or kg per inch/cm, or if it would even be possible to convert it to regular Kg or lbs without the area. Thanks in advance for any help.


pressure is a measure of force that is applied to an area.
You can make conversions between various pressure units here: http://www.convert-me.com/en/convert/pressure
convert-me.com
Site Admin
 
Posts: 402
Joined: Fri Sep 05, 2003 4:50 pm

Thanks much!

Postby Omar » Thu Feb 01, 2007 6:55 am

Thanks Much!
Omar
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?



    Our Privacy Policy       Cooking Measures Converter       Metric conversions