re: propane concentration

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

re: propane concentration

Postby SLW » Wed Sep 14, 2005 11:25 pm

I'm trying to determine the concentration of CO2 in a house produced by a space heater. The space heater produced 330 kW and ran for 2 hours. I can calculate the number of moles of CO2 (54, I think), but don't know how to get it into a concentration.
SLW
 

Re: re: propane concentration

Postby Guest » Thu Sep 15, 2005 12:06 am

SLW wrote:I'm trying to determine the concentration of CO2 in a house produced by a space heater. The space heater produced 330 kW and ran for 2 hours. I can calculate the number of moles of CO2 (54, I think), but don't know how to get it into a concentration.


I think you are a bit off, and I think your real concern should be carbon monoxide, not carbon dioxide. Humans can tolerate up to 4% carbon dioxide, but only 120 ppm 0.00012% carbon monoxide. Since CO represents incomplete or imperfect combustion, there is no good way to estimate it through stoichiometric analysis.

As for total carbon: http://hypertextbook.com/facts/2002/EricLeung.shtml
Energy content of propane is 12.9 kWh/kg, so I calculated the above is about 51 kg of C3H8. Since it is 36/44 carbon, that is about 42 kg of carbon, or 3490 mol at 12 g/mol. That carbon will be in an unpredictable mix of CO2 (hopefully all), CO and HC (unburnt hydrocarbons), the last two being very bad for you.

As for concentration, you'd have to compare that to the total volume of air in the house, including what leaks in (or out, but don't double count) in two hours. The leakage over two hours is mostly likely larger than the volume of the house, but that would depend on windows, weatherstripping, etc.

If I ignore air leakage, a 2000 sq ft house with normal ceilings would have very roughly 200 m^2 of floor, 400 m^3 of air volume. At 20 degrees C, that is about 33000 moles of air. If 10% of that is CO and CO2, I assume you are investigating a fatality. If not, the house leaks like a sieve, or someone is very likely (or I overlooked a major error, somewhere).

If you are investigating a fatality, please note I have rounded liberally, and the numbers are only good to 1-2 figures and should be redone precisely.
Guest
 

Postby Guest » Thu Sep 15, 2005 12:12 am

Sorry, that is about 17000 moles of air in the house. I must have hit a wrong key.
Guest
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?



    Our Privacy Policy       Cooking Measures Converter       Metric conversions

    cron