lb/acre to ppm

Questions and answers on how to convert things from one unit or system to another

Moderator: convert-me.com

lb/acre to ppm

Postby mayo » Sun Feb 19, 2006 1:58 am

For soil testing results, can lbs. per acre be converted to parts per million?
mayo
 
Posts: 1
Joined: Sun Feb 19, 2006 1:55 am

converting lbs/acre to ppm

Postby beezer5477 » Wed Sep 17, 2008 9:47 pm

To convert from ppm to pounds
multiply by 2 and to convert from pounds per acre to ppm divide by 2.
beezer5477
 

Postby Guest » Sun Apr 05, 2009 8:00 pm

Oh heavens no. Each element has a different conversion factor. Let me look them up, much more involved than by 2 or times 2.
Guest
 

Postby Guest » Sun Apr 05, 2009 8:23 pm

Ok I was wrong in post 3 to say post 2 was wrong, but there is an issue and right now my mind is so frazzled I can't explain this logically.

I originally though it was wrong because I recently did calculations on how to raise ppm to a certain number.

Phosphorus - It takes 18 lb/acre to raise by 1 ppm
Potassium - It only takes 8 lb/acre to raise by 1 ppm

So on my quick rash reply I was thinking it's not as simple as just saying 2 lb.

I can't explain this logically, I just use the formulas, you would think if it was as easy as 2 then on application phosphorus and potassium would require the same amount, not one at 18 lb and the other only 8.

Maybe someone can logically explain this to me now.

Again, poster #2, I apologize for quickly saying you were wrong, I had these application conversions in my head.
Guest
 

Postby Guest » Sun Apr 05, 2009 8:39 pm

Anonymous wrote:So on my quick rash reply I was thinking it's not as simple as just saying 2 lb.


I meant simple as just saying 2. Not 2 lb.
Guest
 

Re: lb/acre to ppm

Postby ThSimpson » Thu Jan 06, 2011 10:07 am

You are close on the soil ppm to lb/acre with using 2 BUT!!
All is based on an Acre furow Slice.
1 acre 6" deep =2 million pounds
1 Acre 3" deep= 1million pounds

If Soil test taken at 3' multiply by 1
6" x 2
7" x 2.33
9" x 3
12" x 4

Th
ThSimpson
 

Re: lb/acre to ppm

Postby gelbebrille » Tue Oct 25, 2011 3:01 pm

some soil sample ppm are reported in mg / L....that is equivalent to saying ppm = g / 10^6 g water = g / 10^6 mL water = g / 1000 L water = mg / L water...ok? so it's based on g / million g and assumes density = 1 g/mL..anyway...
you have an area, let's assume a depth to get volume......1 ft...
(1 lbs / acre) x (1 acre / 43560 ft²) x (1 / 1 ft) x (1 ft / 12 in)³ x (1 in / 2.54 cm)³ x (1 cm³ / 1 mL) x (1000 mL / 1 L) x (454 g / lb) x (1000 mg / g) = 0.368 ppm
got that? 1 lb / acre = 0.368 ppm.
Last edited by gelbebrille on Fri Jun 15, 2012 1:14 pm, edited 2 times in total.
gelbebrille
 
Posts: 1
Joined: Tue Oct 25, 2011 2:58 pm

Re: lb/acre to ppm

Postby toddw » Wed Dec 07, 2011 3:09 am

I do not know where you all got your information but, the conversion goes as this

1 acre inch = 3,000,000 lbs therefore

ppm * (0.3*sample depth in inches) = lbs/ac

example a sample was taken at a depth of 6 inches the nitrate came out at 14 ppm

14ppm (0.3 * 6 inches) = 25.2 lbs/ac
toddw
 

Re: lb/acre to ppm

Postby williamblake621 » Thu Jan 19, 2012 8:26 pm

hmm i think your conversion format look pretty easier to understand !
williamblake621
 
Posts: 1
Joined: Wed Nov 30, 2011 4:36 am

Re: lb/acre to ppm

Postby bredhedden1 » Sun Jan 29, 2012 3:52 am

@toddw thanks for such decent format which help me a lot :)
bredhedden1
 
Posts: 1
Joined: Sat Jan 21, 2012 6:29 am

Re: lb/acre to ppm

Postby PatWilliams » Wed Jul 17, 2013 3:37 pm

The main focus of soil fertility and management for crop generation is traditionally the tilled layer of the soil which goes back to the days. This 6-8 inch layer of soil is known as the plow layer. It is interesting that a plow layer weighs approximately 2 million pounds. In later years soil test labs have changed from reporting soil test results in pounds per acre but instead as parts per million (ppm).

Thanks
stopsnoringpro.com
PatWilliams
 
Posts: 2
Joined: Wed Jul 17, 2013 3:30 pm


Return to How to convert?

Who is online

Users browsing this forum: No registered users and 5 guests

Our Privacy Policy       Cooking Measures Converter       Metric conversions