Caliper conversion

Questions and answers on how to convert things from one unit or system to another

Moderator: convert-me.com

Caliper conversion

Postby RJSoftware » Wed Aug 10, 2005 3:17 am

Hello all;

I have a caliper that I use to measure things on my clocks.

In the center of the dial on this caliper is .001"

I take this to mean that it is maybe microns. 1 thousandth of an inch.

However, when discussing / ordering parts my measures seem to be way off.

I believe they are measuring in millimetors.

Anyway, looking at this sites chart I see numbers 254 when displaying Inches to...

I believe that I should just multiply the value I get with my caliper by 2.54 but am I correct.

I am just guessing and do not really know.

Am hoping for confirmation.

RJ
RJSoftware
 

Postby Guest » Wed Aug 10, 2005 3:36 am

The 0.001" means the dial reads in thousandths of an inch. Normally the dial is only part of the reading, the rest has to be read from the marks on the bar that holds the jaws.

Usually inches and tenths are clearly marked and numbered, with intermediate lines between the tenths representing 0.025, 0.050, and 0.075. You have to read the inches and tenths, tally the submarks in your head and add the dial reading.

If the clock parts are in millimeters, 25.4 mm = 1.000" exactly, or you can buy metric calipers.
Guest
 


Return to How to convert?

Who is online

Users browsing this forum: No registered users and 4 guests

Our Privacy Policy       Cooking Measures Converter       Metric conversions