I want to know more about ft-lbs, ft-lbf, in-lbs and in-lbf

Disscussing old, rare, very specific or otherwise uncommon units and measurements
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

I want to know more about ft-lbs, ft-lbf, in-lbs and in-lbf

Postby JFeg » Tue Mar 21, 2006 6:25 pm

As I live in sweden and thus not that familiar with the american way of measuring things, I would like to know the difference between torque units lbs and lbf. It also would be fun to know what the abbreviation stands for, I mean it sems a bit odd to pronounce lbf/lbs - pounds....
JFeg
 
Posts: 3
Joined: Mon Mar 20, 2006 9:22 pm

Postby Guest » Wed Mar 22, 2006 2:21 am

The pound can be either a unit of mass, or a unit of force, specifically the force of standard gravity on a one pound mass (note this relationship would not hold on the moon.)

Thus, it can be hard to determine exactly what is being discussed. Not all engineers do this, but many using Imperial units insist on labelling lbf and lbm for pounds-force and pounds-mass respectively to ensure there is no misunderstanding of what is meant.

In a torque, pound-mass makes little sense so pound-force is meant. There is really no difference between a ft-lb and a ft-lbf except clarity. I assume ft-lbs is a messy abbreviation formed from the plural.

In the equation f = ma, using pounds for both mass and force is a major drawback of Imperial. At least three concepts are used by different groups of engineers:
1) Pound for force only, introduce the artifical unit "slug" for mass (about 32 lb.) so 1 slug accelerated at 1 ft/sec^2 requires a force of 1 lb. Invented by British, but more common in US.

2) Pound for mass only, the artifical unit "poundal" for force. 1 poundal is force to accelerate one pound mass at 1 ft/sec^2. The UK uses this more than US, or I should say, used to use.
The poundal is about 1/32th of a pound-force.

3) Pound mass, and pound force. The f=ma equation is modified to include standard gravity which should be g-sub-zero but I can't do it here. f = m*(a/g). Accelerating one pound at 1 g requires one pound of force. Aerospace seems to like this one.

The fourth solution is to go metric and many US industries have (the auto industry for example). The three groups of engineers who use the first three solutions confuse the hell out of each other. (I am a member of the fourth group)

Many other standard equations need to be patched for pound as force and mass. I was trained in metric and frankly don't know how to do them all. I was entirely baffled by an "English" form of Bernoulli's equation for example.


The abbreviation lb for pound comes from the Latin word libra, a weight more or less a pound.
Guest
 

Postby JFeg » Wed Mar 22, 2006 2:43 am

Many thanks guest,
to finally have an answer to my questions ! :D
Best regards!!
JFeg
 
Posts: 3
Joined: Mon Mar 20, 2006 9:22 pm


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to Exotic units



    Our Privacy Policy       Cooking Measures Converter       Metric conversions

    cron