Electrons in micron

Disscussing old, rare, very specific or otherwise uncommon units and measurements
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

Electrons in micron

Postby sanelife » Thu Nov 27, 2003 12:27 pm

I am trying to figure out the number of electrons that would fit in a micron, but I can't find anything that tells me how to figure it.
sanelife
 
Posts: 1
Joined: Thu Nov 27, 2003 12:22 pm

electrons

Postby ben » Tue Jan 27, 2004 11:35 pm

Its not as simple as that, due to quantum physics the closer you look at an electron, the smaller it gets :o

Therfore i dont believe there is an answer to that question :shock:
ben
 

Electrons in micron

Postby quizzicalteenager » Sat Mar 20, 2004 11:48 am

I think the answer to this question needs some help from Knight. I believe that scientists have come up with an approximate measure for the diameter of an electron. If you were to find this measure, should it exist, and convert it, I am sure that you can come up with an actual approximate answer to this question (yes, an actual approximate answer... the size of an electron, at least to my knowledge, is not scientifically proven, but merely guessed at).
quizzicalteenager
 
Posts: 2
Joined: Sat Mar 20, 2004 11:26 am

Re: Electrons in micron

Postby Knight » Mon Mar 22, 2004 11:52 pm

quizzicalteenager wrote:I think the answer to this question needs some help from Knight. I believe that scientists have come up with an approximate measure for the diameter of an electron. If you were to find this measure, should it exist, and convert it, I am sure that you can come up with an actual approximate answer to this question (yes, an actual approximate answer... the size of an electron, at least to my knowledge, is not scientifically proven, but merely guessed at).

According to The World Book Encyclopedia "The diameter of an electron is less than 1/1000 the diameter of a proton. A proton has a diameter of approximately 1/25,000,000,000,000 inch (0.000000000001 mm)." (World Book Encyclopedia. Chicago: World Book) That would place the size of an electron at < 10^-18 m. According to Linus Pauling, "The radius of the electron has not been determined exactly but it is known to be less than 1 x 10-13 cm" (Pauling, Linus. College Chemistry. San Francisco: Freeman, 1964: 57, 4-5.) That would give us a value of < 10^-15 m.

Trying to determine the size of an electron runs us into an old nemesis, the uncertainty principle. The short version is that we can know the location of an object, or we can know its speed. Not both. Since the bloody things move around so much, we can’t get a good look at them to figure out their shoe size.

However, we can take a round-a-bout way to figure out the radius: The Classical Electron Radius, or the Compton radius, is defined by equating the electrostatic potential energy of a sphere of charge e and radius Ro with the rest energy of the electron:

Code: Select all
     e²
U = ---- = MeC²
     Ro

where -e is the charge on the electron, Me is the electron mass, and c is the speed of light. Solving for Ro yields:

Code: Select all
       e²
Ro = -----
      MeC²

NIST defines the Classical Electron Radius as 2.817940285 × 10-15 m.

However, according to Malcolm H. Mac Gregor, “The electron is a point-like particle - that is, a particle with no measurable dimensions, at least within the limitations of present-day instrumentation. However, a rather compelling case can be made for an opposing viewpoint: namely, that the electron is in fact a large particle which contains an embedded point-like charge.” (Mac Gregor, Malcolm H. The Enigmatic Electron. Boston: Klurer Academic, 1992: 4-5.)

There you have it. As clear and unfuddled as science can create. Now all you need to do is grab a bunch of electrons and convince them to line up, side by side. Just how many electrons are we going to need? Lets see:

If the minimum radius is 1e-18 m, then the diameter would be 2R, oe 2e-18 m.

therefore:

1e-09
------ = 5e8 electrons per micrometer.
2e-18

Assuming the maximum value of 1e-15 m. then we have a radius of 2e-15, giving us,

1e-09
----- = 5e5 electrons per micrometer
2e-15

So, were going to need somewhere between 500,000 and 500,000,000 electrons.

For your next assignment, I'd like you to take the average diameter of the head of a pin, in meters...
Knight
Expert
 
Posts: 309
Joined: Tue Jan 13, 2004 9:43 pm
Location: Los Alamos, NM

help!

Postby me » Fri Jul 28, 2006 5:09 am

can someone help me figure this out and tell me how to figure it out? Here it is:

3x+10-5x=6x-50

what does x equal?
me
 

Re: help!

Postby Guest » Mon Jul 31, 2006 4:06 pm

me wrote:can someone help me figure this out and tell me how to figure it out? Here it is:

3x+10-5x=6x-50

what does x equal?


3x + 10 - 5x = 6x - 50
-2x + 10 = 6x - 50
-2x + 10 - 10 = 6x - 50 - 10
-2x - 6x = 6x - 60 - 6x
-8x = -60
-8x/-8 = -60/-8
x = 7.5

i have don this as simply as posible to show you all the steps of working out.
Guest
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to Exotic units



    Our Privacy Policy       Cooking Measures Converter       Metric conversions

    cron