angular velocity

Questions and answers on how to convert things from one unit or system to another
Forum rules
Dear convert-me.com forum visitors,

Our forum has been available for many years. In September 2014 we decided to switch it to read-only mode. Month after month we saw less posts with questions and answers from real people and more spam posts. We were spending more and more resources cleaning the spam until there were less them 1 legitimate message per 100 spam posts. Then we decided it's time to stop.

All the posts in the forum will be available and searchable. We understand there are a lot of useful information and we aren't going to remove anything. As for the new questions, you can always ask them on convert-me.com FaceBook page

Thank you for being with us and sorry for any inconveniences this could caused.

angular velocity

Postby 86yamvmax » Wed Mar 25, 2009 8:15 pm

Given the formula P=Tw where;

P=power
T=torque
w=angular velocity

I have 80 ft-lbs of torque @ 420 ft/min (Tw)

what is the power?
is ft/min a correct unit for angular velocity?
I came up with P=33600 but don't know what units to assign

Kirk
86yamvmax
 

Re: angular velocity

Postby Guest » Wed Mar 25, 2009 9:18 pm

86yamvmax wrote:Given the formula P=Tw where;

P=power
T=torque
w=angular velocity

I have 80 ft-lbs of torque @ 420 ft/min (Tw)

what is the power?
is ft/min a correct unit for angular velocity?
I came up with P=33600 but don't know what units to assign

Kirk


As stated, there is insufficient information to solve. The proper units of angular velocity are radians per second. (There are 2*pi radians in 1 revolution).

What is the physical interpretation of the 420 ft/min? Is it the surface speed of a wheel, or the speed of a belt on a pulley? If you know the radius, you could determine the angular velocity.

Note that 420 ft/min is 7 ft/sec. If this linear velocity is the also the surface velocity of some wheel or pulley, then divide by the radius (in ft) to get angular velocity in rad/s.
Guest
 

Postby Guest » Wed Mar 25, 2009 9:45 pm

my rpm is 15 so...
angular velocity=0.785 rad/s

then P=0.785*80=62.8?

62.8 is watts?
Guest
 


More info

  • List of all units you can convert online
  • Metric conversion
  • Convert pounds to gallons
  • Convert grams to cups
  • Grams to milliliters
  • Imperial vs US Customary
  • History of measurement
  • Return to How to convert?



    Our Privacy Policy       Cooking Measures Converter       Metric conversions

    cron